If the Storage Battery is not used for a long time, it will slowly discharge itself until it is scrapped. Therefore, the car should be started once every certain time to charge the battery. Another method is to pull out the two electrodes on the battery. It is necessary to remove the positive and negative electrode wires from the electrode column. First, unplug the negative wire or remove the connection between the negative electrode and the chassis of the car. Then remove the other end with the positive mark (+). The battery has a certain service life and will be replaced in a certain period of time. The same order should be followed when replacing, but when the electrode wires are connected, the order is reversed, first connected to the positive electrode and then to the negative electrode.
China Storage Battery Manufacturer remind you When the ammeter pointer indicates that the storage capacity is insufficient, it should be charged in time. The storage capacity of the battery can be reflected on the instrument panel. Sometimes the power is not enough on the road, and the engine can't start. As a temporary measure, you can ask other vehicles for help. Use the battery on the vehicle to start the vehicle, connect the negative and negative poles of the two batteries, and connect the positive pole to the positive pole. .
The density of the electrolyte should be adjusted according to the standards according to different regions and seasons.
Distilled water or special rehydration should be added when the electrolyte is deficient. Never use pure water instead. Because pure water contains a variety of trace elements, it will have an adverse effect on the battery.
We are the professional supplier E-Bike Battery China, if you are interested in it, please call us at any time.